PRODUCT

diamond hand polishing pads for ceramic stone marble

WNGX080608R-F7 Milling Inserts

Square Shoulder Milling Inserts, suitable for steel, stainless steel and cast iron rough and Semi-finishing milling, slot milling processing, full pressing type inserts.

WNMU080608EN-GM Milling Inserts

Suitable for steel, stainless steel and cast iron high feed milling processing, good universality.

WNMU080608EN-SM Milling Inserts

Suitable for steel, stainless steel and cast iron high feed milling processing, large rake angle and low resistant forces, cutting is stable, the maximum Ap is 8mm.

Pressed Thread Inserts

Thread Inserts. Suitable for ISO K/P/M/N/S/H material.

Metric Trapeze Thread Inserts 30°(TR)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. Trapeze thread is commonly used in power transmission device with high accuracy requirements, such as the screw of the lathe and the screw rod ofskateboards. The insert can ensure the accuracy of the thread during the machining process, so as to achieve efficient and stable power transmission. lt is suitable for heavy machinery,automobile ma

Partial Profile V-style Thread Inserts (MTTR)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. The insert adopts a screw locking method to ensure stability under high-speed rotation. The chip removal groove is wide and the chip removal is smooth,which effectively avoids chip accumulation and improves processing efficiency.The insert has a wide wear area to effectively resist wear and impact.

Metric Buttress Thread Insert 3°/30°(SAGE)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. German sägengewinde (DlN513), metric buttress (SAGE) thread, combines the strengths of high transmission efficiency square thread and strong root trapeze thread, which is asymmetric thread and can only be forced one-direction, the bearing side is 3°, always in contact state, the non-bearing side is 30°, always in the state of seperation.

Metric Aerospace Thread Insert 60°(MJ)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. The thread form mainly used in Aircraft and Spacecraft products, it is developed based on the ordinary metric thread standard. lt is a metric thread with an enlarged and controlled arc radius at the bottom of the thread. The insert has high precision, high machining efficiency and long service life.

German Steel Conduit Thread Insert 80° (PG)

Thread Inserts. German panzergewinde (DIN40430), steel conduit (PG) thread 80°, it is widely used in pipeline connections, valves, pumps and other equipment, The pitch is fine and the sealing is good. There is no need to use a seal when connecting, but through the close cooperation of threads to achieve sealing. This connection method is simple and reliable,and is suitable for pipe connection under harsh working conditions such as high pressure, high temperature and corrosive media.

U-Style Trapeze Thread Insert 30°

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. Double chip groove design, high-precision and sharp peripheral grinding edges,smooth and efficient chip removal, to meet the processing needs of different industries, widely used in various machine tools, molds and processing equipment,suitable for aviation manufacturing, heavy industry manufacturing, mold manufacturing, auto parts manufactu

American Trapez Thread lnserts 29° (ACME)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. The most common forms used for transmission devices such as leadscrews (power screws). They offer high strength and easy of manufacture, has high transmission efficiency, and can be adjusted by nuts after wear. Including the general-purpose ACME thread and U-Style ACME thread, among which the general-purpose ACME thread has the same performa

British Whitworth Standard Thread inserts 55°(BSW)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. The insert is characterized by high precision and high wear resistance.Whitworth thread fasteners are widely used in a variety of equipment and structures.lt is widely used in machinery manufacturing, aerospace,automobile manufacturing and other fields.

Round Thread insert 30° DIN405(RD)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. Flat thread inserts, for finish machining at low to medium cutting speed,has brilliant performance during cutting. Strengthened edges assures correct tooth depth and no need to deburr.

Thread Milling for Deep Hole

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. Triangle positioning makes the insert and insert slot closely fitting, avoiding the problem of cdges broken since the insert loosing. Each insert independent water holes to make deep hole processing inner cooling, suitable for diferent materials, finishing and sem-finishing，high universality and wide range of applications.

Unified National Thread inserts 60°(UN)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. Made of high-quality materials, it has excellent cutting and durability, can efficiently complete thread processing, and is widely used in mechanical manufacturing, petrochemical, construction engineering and other fields.

American Aerospace Thread inserts 60°(UNJ)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. The insert is often used in threaded connections in the mechanical and engineering fields, which has higher quality and accuracy requirements.It is suitable for applications with high strength and high reliability requirements,such as aerospace, automobile manufacturing and defense industry.

American VAM Thread inserts(VAM)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. The insert is mainly used in industrial fields that require high-precision threaded connections, and is widely used in oil and gas, chemicalindustry, machinery manufacturing and other industries. Especially in the oil and gas industry, it is more widely used and is often used to process the threads of key components such as tubing and casing

British Standard Pipe Taper Thread Inserts 55°(BSPT)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. The insert is used to process the connection part of various precision parts and components. lts 1:16 taper design can ensure an excellent sealing effect and ensure that the pipe connection does not leak. it is widely used in machinery manufacturing, transportation, petrochemical, gas pipe and other fields.

American Buttress Thread 7°/45°(ABUT)

Thread Inserts. Suitable for ISO K/P/M/N/S/H material. The buttress thread combines the strengths of high transmission efficiency square thread and strong root trapeze thread, which is asymmetric thread and can only be forced one-direction, the bearing side is 7°, always in contact state, the non-bearing side is 45°, always in the state of seperation.

American National pipe Taper Standard 60°(NPT)

Thread Inserts Suitable for ISO K/P/M/N/S/H material. NPT thread is a kind of American standard 60° taper thread, which is mainly used for pipe connection and sealing to prevent fluid leakage. This thread standard is widely used in the United States, especially in the petroleum, chemical and construction industries.